Using identical curve guidelines

Some fields are not rectangular and have a curved or shaped boundary. In these cases identical curves may be the best option for guidelines. This may be useful for steering assistance near the field boundary and for using these

guidelines again for future jobs.

Identical curves allows the operator to set a curved guideline and the system will create equidistant guidelines across the field, based on a swath width.

1. Position the vehicle.
2. Select Guidelines menu / Change guidance mode, if necessary, to select Identical curves .
3. Select Create new identical curve guideline .
4. Select GUIDELINE NAME.
5. Enter a name, if desired, and Confirm. Confirm the new guideline.
6. Drive the vehicle to start of the swath. Select Set "A" Point .
7. Drive along the curved swath. A black line will appear behind the vehicle on the map to indicate the curve that is being recorded.

Note: guideline recording may be suspended if necessary.

8. At the end of the curved swath, select to indicate the end point of the recorded curve.